Standard Medium Red Cedar Blinds

11-15 working daysCustom madeWarranty 2 years
Customise your Cedar Blinds
How to measure?
$97 00
Photos are for illustrative purposes only. Appearance, colours and size may vary.


5% OFF Guaranteed.

Cedar the ultimate in timber blinds

Your window is an important focal point in your interior. Dress it with sophistication through this Medium Red Cedar Blind. Its rich natural reddish brown color looks beautiful and elegant in your window, matching perfectly well with a rustic or an eclectic interior design. We adore the craftsmanship and the natural beauty this blind has shown to us.

Plus, with this blind, you can effortlessly control the light streaming into your space, while keeping the unwanted attention from outsiders out. Comfort and style, these are what this Cedar blind is all about.

Plus, you get these three great Half Price Blinds features:

  • Each comes with a 60mm pelmet to add a classy finishing touch
  • A heavy duty headbox
  • High quality cord and easy to operate tilt mechanisms

Cedar Blinds Standard Medium Red Product Specifications

Minimum width: 350mm
Maximum width: 2400mm
Minimum drop: 350mm
Maximum drop: 2150mm
Blind colour: Medium Red
Measurement type: Recess or Face fit
Wand Postion: Left side
Cord Postition: Right side
Package contents: Blind, fixing brackets, chain cleat, installation instruction

How to measures

Measuring your window blinds

No matter what type of blind you require, measuring your windows is easy with our simple instructions.

What you will need

  1. Tape measure (metal ones are best)
  2. Pen and paper

Recess Fit (Inside window frame)

Measuring a Face Fit window

When the blinds are required to fit inside the window recess.

Select this option if you wish to supply the size of the recess into which the blinds will fit. To provide this measurement, select "inside recess" as the measurement option. This will require measurement of the window in 3 places, as shown to the right; please provide us with the smallest measurement.

On all blinds except Roller Blinds and Vision Blinds we will deduct a small amount to ensure the blinds clear the sides and bottom of the recess, allowing for correct operation. We will make a deduction of 10mm from the width, 5mm off each side and up to 10mm from the drop. On Roller Blinds and Vision Blinds we only allow approximately 2mm deduction on width measurement as this will lessen the fabric gap.

Roller Blinds Important Information

Measuring a Recess Fit Roller Blind
  1. The actual fabric width will be APPROXIMATELY 32mm LESS than the width you supplied..
  2. The GAP at each side is not the same. The gap at the control side is slightly wider than the other side.
  3. Do NOT order using fabric width.

Minimum Depth required for RECESS TO FIX BRACKET.

This is a guide with an understanding that the minimum depth for the bracket may mean that the blinds and bracket will sit outside the window recess.

Roller Blinds 30mm - 70mm
Double Roller Blinds 30mm - 100mm
Vertical Blinds 89mm 30mm - 85mm
Vertical Blinds 127mm 30mm - 90mm
Aluminium Venetian Blinds 20mm - 35mm
Timber-look Nova Blinds 30mm - 70mm
Cedar Venetian Blinds 30mm - 70mm
Panel Glide Blinds 30mm - 65mm
Vision Blinds 55mm - 85mm
Sheer Curtains (Vertical Sheer Blinds) 30mm - 90mm

Face Fit (Outside window frame)

Measuring a Face Fit window

When the blinds are required to hang outside the window recess.

For all types of blinds follow these instructions if you want your blind to hang outside the window recess:

  1. Measure the exact width of where you'd like your blind to be. We recommend the blind overlaps the window by at least 50mm to a 100mm on each edge depending on the space you have. If you have an architrave we recommend measuring from outside of architrave to outside of architrave. Note the measurement.
  2. Measure the exact drop from the top of where you want your blind to be to the bottom. Please note we recommend 50mm to a 100mm above the window opening depending on the space you have. Note the measurement.

Roller Blinds Important Information

Measuring a Face Fit Roller Blind
  1. The finish blind will be made EXACTLY to the width you supplied.
  2. The actual fabric width will be APPROXIMATELY 32mm LESS than the width you supplied..
  3. The GAP at each side is not the same. The gap at the control side is slightly wider than the other side.
  4. Do NOT order using fabric width.

Handy Hints

  • All of our blinds are made to measure. Please follow the instructions carefully. Make sure you take your measurements using a STEEL rule or tape.
  • Take all your measurements in millimetres (mm).
  • When measuring, always look out for things like window handles or tiles and take their position into account if necessary, to ensure a perfect fit.
  • When taking measurements please follow this helpful rule - "measure once, measure twice and measure again to be sure!".
  • All of our blinds can be fitted into the face of the window frame or wall, or into the top of the lintel. This gives you complete control over the positioning of your blind.

How to install

Cedar Timber Venetian Blind Installation Instructions

Download Instructions

Please Note: Screws are not supplied for bracket fixings and are dependent on the surface to which you are fixing please see chart below for recommended guide:
Fixture Guide Recommended Philips Head
Wood ¾" 8 gauge for recess fit and ½" 8 gauge for face fit
Steel ½" 6 gauge
Ceiling Toggle Bolt
Plasterboard Wall mates
Aluminium ½ 8 gauge or tech screw
Brick Green plug and 1 ½ 8 gauge self tapper

Watch how to install a Cedar Timber Venetian Blind


Depending on if your blind is face fit or recess fit place the brackets in position and with a pencil mark the surface of the wall or window recess for drilling. Brackets should be positioned at each end of the head rail avoiding internal controls. On larger blinds one or more central support brackets are required. Your blind will come with the recommended quantity.

The bracket fixes to the wall with the lever arm at the top facing outwards.


When you are happy that you have correct positions for the brackets pre drill the screw holes and fix brackets securely.


To fit the blind, make sure bracket levers are in open position. Position head box onto the brackets and holding in place twist lever across towards head box to lock the head box to the bracket.


Secure the safety cleat supplied, firmly to the wall at least 1.6m up from the floor to avoid a choking hazard. It is important to keep chains and cords safely away from children your new blind will have a safety warning tag attached please read carefully and do not remove.


To operate your new blind use cord control to lift and lower, using a steady tension and movement and avoid jerking or tugging of the cords.


Do you do installation?

No, we are an online supplier only, all our customers do the installing themselves.

Can i order samples of fabrics?

Yes, on our website you can order free samples and we will ship it for free.

Do you supply extension bracket?

Yes we can supply those please make note of this in the comment section of your order.

What if my blinds don't fit?

You can organise to send your blinds back if they are too large. We can trim them down for a small fee.

If your blinds is too short you will need to purchase new ones. So check triple check your measurements.

What are your office hours?

Our customer services operates Monday to Friday 10:30am - 6:30pm AEST

Can you do a Cord Control Vertical Blinds

Yes we can.

What colour is Opal Anodised

Silver Brushed.

Product Review
Fantastic service
5 star
Was quite hesitant ordering Two large Roman blinds unseen.... have to say really very impressed and wouldn't hesitate in recommending Half Price Blinds.... made to measure and literally half the price!..arrived within two weeks hassle free. Hayley contacted me straight away to confirm we had received them... will be using them again!
Show more
Product Review
Exceeded expectations!
5 star
I needed to block heat coming through a front door and side panel with glass inserts that allowed heat to pour into the house. This door is not often used so I decided to mount a roller blind over the door...something easily raised if someone rang the doorbell. An Internet search showed halfpriceblinds to offer a good product at the best price with reasonable shipping costs & times. Honestly, comm unication was great with shipping/tracking info provided once the blind was on it's way. Installation was a breeze. The instructions are simple and minimal DIY skills are needed. And the blind TOTALLY does the job! The entry hall this morning was lovely & cool. And the blind looks great; it LOOKS like the quality product that it is! Great experience & a special thanks to [name removed] & [name removed].
(Sydney, NSW)
Show more