Basswood Timber White Beige 1603 Plantation Shutters

8-10 weeksCustom madeWarranty 2 years
Customise your Shutter Blind
How to measure?

One of our friendly customer service representative will contact you within 24 hours (weekdays) before we process your order.

$324 00
Photos are for illustrative purposes only. Appearance, colours and size may vary.


5% OFF Guaranteed.

The Fit-Yourself Indoor Basswood Shutters

Basswood is a world-renowned hardwood (Tilia Americana) and comes from the Linden family of trees. It is revered for its strength and light, lustrous beauty.

Choose a white shade with a character. This White Beige Basswood Timber Shutter has it --a shade of white with a soft hint of beige. Choosing white can also be a bold choice. But having white with undertones of pastel colors is safe. It still dresses your home with elegance and style.

Plus, you can raise and lower those louvres for your lighting and privacy needs.

  • They are suitable for indoor window fitting only.
  • They're available in a selection of two colours. In its natural state, Basswood is light and ideal for staining. If even consistency of colour is required by you, Basswood is ideal. Obviously, Basswood is a natural timber so it possesses all the natural colour and texture variations you'll find in any timber.
  • Basswood is not highly susceptible to colour change. Typically, any colour change is gradual and not clearly discernible.
  • Basswood is a medium-density timber so it's suitably light and also capable of resisting knocks and bumps
  • Each Fit-Yourself Basswood shutter has a UV-stabilised single-pack lacquer finish and is designed for interior use only. It should not be exposed to wet weather.
  • Because it's kiln-dried, Basswood timber is resistant to warping and bowing, making it the perfect shutter timber
  • Basswood is a sustainably managed plantation-grown timber so it's environment-friendly.

Plantation Shutters Basswood Timber White Beige 1603 Product Specifications

Minimum width: Fixed: 250mm
Hinged: 250mm
Bi-fold: 250mm
Slide: 250mm
Maximum width: Fixed: 900mm
Hinged: 900mm
Bi-fold: 600mm
Slide: 800mm
Maximum drop: Fixed: 3000mm
Hinged: 3000mm
Bi-fold: 3000mm
Slide: 3000mm
Blind colour: White Beige 1603
Measurement type: Recess or Face fit
Blade Sizes: 69mm, 89mm and (114mm Basswood timber)
Basswood Recess fit mount frame: L-frame, Standard Z-frame, Crown Z-frame
Basswood Face fit mount frame: L-frame, Camber Deco
Aluminium Recess fit mount frame: Small L, Pattern Z, Plain Z
Aluminium Face fit mount frame: Small L, Outside Mount Frame
Tilt options: Clearview, Center
Operation type: Fixed, hinged, bi-fold, slide
Number of Panels Up-to 8 panels based on width
Package contents: Blind, Installation instructions

How to measures

How to measure your shutter before you order it.

It's of course very important that you measure precisely the space into which your Fit-Yourself Shutter is going to be secured.

The shutters we customise for you, based on the specifications you give us, cannot be adjusted once we've delivered them to you.We can promise and guarantee that we'll send you your customised shutters precisely as per your detailed order. But we can't guarantee that the measurements you've sent us are correct.

Some helpful background information on our high-quality shutters.

  1. Our shutters generally have a shutter panel attached (hinged) to a frame.
  2. The panel consists of louvres which swivel open and closed.
  3. There are stiles which run vertically on the sides and rails which run horizontally along the top and bottom of the shutter.
  4. Panels with a height greater than 1800mm will include a divider rail.
  5. This adds strength to the construction and added support to each shutter panel.
  6. It also allows you to open the top louvres while keeping the bottom ones closed.
  7. See the diagram for a clearer understanding of the component parts.

Single Panel Shutter

Single panel Indoor Shutter

Two Panel Shutter

Two panel Indoor Shutter with frame

How to measure for Recess Fit Shutters

Naturally, an inside-mounted shutter sits within your window frame. Many regard it as the sleeker and more modern way to install one's shutters, providing you have sufficient depth. There are three inside-mount frame options possible:

Note: It's critical to note there are minimum depth requirements for our Fit-Yourself Shutters to ensure they fit flush with the wall ( please refer to the chart below). If your window opening doesn't meet this minimum requirement, you MUST use an Outside Mount Frame.
  Minimum Depth Requirements
Blade L-frame Z-frame
63mm Blades 60mm 60mm
89mm Blades 72mm 72mm
115mm Blades 89mm 89mm

If installation occurs in a window opening without a protruding sill, the inside-mounted Z-Frame will extend around 28mm onto the face of the wall - See Illustration 2. However, if the sill is protruding, the base of your shutter frame will end at the top of the sill - See Illustration 1.

The decorative trim face of the Z-Frame will cover most of the apparent inconsistencies or any light gaps created due to the window frame not being precisely 'square' and will hide deviations of up to 5mm on either side of the frame

Inside Frame - Non Proturding Sill

Illustration 1

Inside Frame - Proturding Sill

Illustration 2

Note: It's easy to measure accurately the size of shutter you'll need to fit your window space perfectly but your attention-to-detail is critical. You must use a steel measuring tape and measure each and every window space as they may well all be slightly different sizes even though they appear identical.
Inside Frame - Proturding Sill

Illustration 1

Inside Frame - Non Proturding Sill

Illustration 2

First, please refer to the Minimum Depth Requirements chart. gruntPlease note that special attention should be given to window openings which have:

  1. Sloping window sills
  2. Window cranks
  3. Latches
  4. Security devices
  5. Removeable screens

Any one of these may obstruct the shutter frame. When measuring for our Inside Mount Shutters ensure you have the proper clearance depth shown above, based on your measurement to the front of the nearest obstruction. If you have any queries, please contact us.

How to make your precision measurements for your fit-yourself shutters.


You'll need to measure the width of each window opening in three places: the top, middle and bottom, as shown in Illustrations A and B.

  1. Take the smallest of the three measurements and write it down on a piece of paper.
  2. This width size is the size you will need to order, without making any deductions to it.
  3. Our factory will make a minor deduction to each accurate size you give us to allow for easy installation.


Measure each window's height in three places: across the top, middle and bottom, as shown in Illustrations A and B. Then, take the smallest measurement and use this as the size you place on your order to us. Our factory will make a minor deduction to this height measurement to allow for easy installation of you new shutter.

Height and width adjustments needed

Our factory will make any necessary adjustments needed to enable easy self-fitting of your blind. Do not make any adjustments to your measurements. Just send us the precise dimensions you measured carefully.

Important note if the height of your shutter is over 1800mm

If your shutter height is greater than 1800mm it will automatically include a centred divider rail.

How to measure for Face Fit Shutters

Face fit with protruding sill

Face fit with non protruding sill

Important not about the importance of accurate measuring

Our Fit-Yourself Shutters are very easy to install but it's essential that the measurement of the window space into which they need to fit, to be very precise. You MUST use a steel measuring tape and measure each and every window, regardless of whether or not they appear identical. In most cases, they won't be.

Our Outside Mounted Fit-Yourself shutter will come to you without and deductions to the sizes you specified on your order to us. When ordering your Outside Mounted shutter, ensure that you specify the 'finished sizes', including the frame.


When determining the finished width of your Fit-Yourself Shutter, make sure you measure the OUTSIDE edge of the architrave ( as shown in the diagram above).


When measuring a window with no sill, please ensure that you measure the edge of the architrave using a steel measure. Measure from the top of the sill to the very top edge of the architrave ( as shown in the diagram above).

How to install


Do you do installation?

No, we are an online supplier only, all our customers do the installing themselves.

Can i order samples of fabrics?

Yes, on our website you can order free samples and we will ship it for free.

Do you supply extension bracket?

Yes we can supply those please make note of this in the comment section of your order.

What if my blinds don't fit?

You can organise to send your blinds back if they are too large. We can trim them down for a small fee.

If your blinds is too short you will need to purchase new ones. So check triple check your measurements.

What are your office hours?

Our customer services operates Monday to Friday 10:30am - 6:30pm AEST

Can you do a Cord Control Vertical Blinds

Yes we can.

What colour is Opal Anodised

Silver Brushed.

Product Review
Great service, quick turnaround and excellent product
5 star
I have used Half Price Blinds on two occasions now, and about to go a third time. In both cases to date, the order has arrived promptly , and is a hell of a lot quicker than having them made locally, I can assure you. Everything to date has been a perfect fit. I have ordered plain, block out white roller blinds. They are crisp, clean and achieve the look I wanted. My first order was for a b edroom, which required 6 blinds, and the 2nd order was for a complete house lot which was for 20 or more - some very small ensuite sized ones, and some large sliding door blinds. I measure, remeasure, and get someone else to double check my measurements, it is my responsibility to get it right. If you follow the instructions, work through the process carefully (its easy) and double check your order, then your job is done. My husband was able to install them, and his handyman skills are very basic, so he was pretty impressed. I have had no trouble with communication from them, they reply to emails, and answered calls with a question I had about making a change to some at a later date. Its a great service, one that I will continue to use.
Andrea T.
Show more
Product Review
Excellent service, good price on a quality item.
5 star
I first placed my order for a kitchen cedar blind a few years ago for my home on the Gold Coast. When it arrived I was very happy with the quality and the ease of which to install it. When I moved interstate, I bought a house and renovated it and decided to buy blinds from Half Price Blinds. This time my order consisted of 5 cedar blinds. All were delivered ahead of the expected delivery date. The quality is excellent, the prices are more than reasonable and the office staff are very knowledgeable and helpful. I wouldn't hesitate in recommending Half Price Blinds to anyone.
Christine F
Show more