Aluminium Gloss White Plantation Shutters

8-10 weeksCustom madeWarranty 2 years
Customise your Shutter Blind
How to measure?

One of our friendly customer service representative will contact you within 24 hours (weekdays) before we process your order.

$290 00
Photos are for illustrative purposes only. Appearance, colours and size may vary.
Free Shipping* on all orders Australia-wide


5% OFF Guaranteed.

The Fit-Yourself Indoor Aluminium Shutters

We love this Gloss White Aluminum shutter for its clean and refreshing look. Go for white when you need more space, some clarity and peace of mind. It is like your best friend, so cool to be next with.

These shutters give you the freedom to manage your lighting and privacy by just opening and closing the louvres.

Aluminium is a wonderful shutter material because it's light, strong and remarkably durable and offers you the following five, key benefit:

  • Our Aluminium shutters come in three popular shades of white.
  • Each shutter also gives you the choice of two shutter-blade sizes: 63mm and 89mm
  • All our shutters are high-tech powder coated, which is far more attractive and knock-resistant than traditional paint.
  • The shutters have a 'soft-look' which is a function of the use of the smooth-edged aluminium and the smooth powder-coating.

Plantation Shutters Aluminium Gloss White Product Specifications

Minimum width: Fixed: 250mm
Hinged: 250mm
Bi-fold: 250mm
Slide: 250mm
Maximum width: Fixed: 900mm
Hinged: 900mm
Bi-fold: 600mm
Slide: 800mm
Maximum drop: Fixed: 3000mm
Hinged: 3000mm
Bi-fold: 3000mm
Slide: 3000mm
Blind colour: Gloss White
Measurement type: Recess or Face fit
Blade Sizes: 69mm, 89mm and (114mm Basswood timber)
Basswood Recess fit mount frame: L-frame, Standard Z-frame, Crown Z-frame
Basswood Face fit mount frame: L-frame, Camber Deco
Aluminium Recess fit mount frame: Small L, Pattern Z, Plain Z
Aluminium Face fit mount frame: Small L, Outside Mount Frame
Tilt options: Clearview, Center
Operation type: Fixed, hinged, bi-fold, slide
Number of Panels Up-to 8 panels based on width
Package contents: Blind, Installation instructions

How to measures

How to measure your shutter before you order it.

It's of course very important that you measure precisely the space into which your Fit-Yourself Shutter is going to be secured.

The shutters we customise for you, based on the specifications you give us, cannot be adjusted once we've delivered them to you.We can promise and guarantee that we'll send you your customised shutters precisely as per your detailed order. But we can't guarantee that the measurements you've sent us are correct.

Some helpful background information on our high-quality shutters.

  1. Our shutters generally have a shutter panel attached (hinged) to a frame.
  2. The panel consists of louvres which swivel open and closed.
  3. There are stiles which run vertically on the sides and rails which run horizontally along the top and bottom of the shutter.
  4. Panels with a height greater than 1800mm will include a divider rail.
  5. This adds strength to the construction and added support to each shutter panel.
  6. It also allows you to open the top louvres while keeping the bottom ones closed.
  7. See the diagram for a clearer understanding of the component parts.

Single Panel Shutter

Single panel Indoor Shutter

Two Panel Shutter

Two panel Indoor Shutter with frame

How to measure for Recess Fit Shutters

Naturally, an inside-mounted shutter sits within your window frame. Many regard it as the sleeker and more modern way to install one's shutters, providing you have sufficient depth. There are three inside-mount frame options possible:

Note: It's critical to note there are minimum depth requirements for our Fit-Yourself Shutters to ensure they fit flush with the wall ( please refer to the chart below). If your window opening doesn't meet this minimum requirement, you MUST use an Outside Mount Frame.
  Minimum Depth Requirements
Blade L-frame Z-frame
63mm Blades 60mm 60mm
89mm Blades 72mm 72mm
115mm Blades 89mm 89mm

If installation occurs in a window opening without a protruding sill, the inside-mounted Z-Frame will extend around 28mm onto the face of the wall - See Illustration 2. However, if the sill is protruding, the base of your shutter frame will end at the top of the sill - See Illustration 1.

The decorative trim face of the Z-Frame will cover most of the apparent inconsistencies or any light gaps created due to the window frame not being precisely 'square' and will hide deviations of up to 5mm on either side of the frame

Inside Frame - Non Proturding Sill

Illustration 1

Inside Frame - Proturding Sill

Illustration 2

Note: It's easy to measure accurately the size of shutter you'll need to fit your window space perfectly but your attention-to-detail is critical. You must use a steel measuring tape and measure each and every window space as they may well all be slightly different sizes even though they appear identical.
Inside Frame - Proturding Sill

Illustration 1

Inside Frame - Non Proturding Sill

Illustration 2

First, please refer to the Minimum Depth Requirements chart. gruntPlease note that special attention should be given to window openings which have:

  1. Sloping window sills
  2. Window cranks
  3. Latches
  4. Security devices
  5. Removeable screens

Any one of these may obstruct the shutter frame. When measuring for our Inside Mount Shutters ensure you have the proper clearance depth shown above, based on your measurement to the front of the nearest obstruction. If you have any queries, please contact us.

How to make your precision measurements for your fit-yourself shutters.


You'll need to measure the width of each window opening in three places: the top, middle and bottom, as shown in Illustrations A and B.

  1. Take the smallest of the three measurements and write it down on a piece of paper.
  2. This width size is the size you will need to order, without making any deductions to it.
  3. Our factory will make a minor deduction to each accurate size you give us to allow for easy installation.


Measure each window's height in three places: across the top, middle and bottom, as shown in Illustrations A and B. Then, take the smallest measurement and use this as the size you place on your order to us. Our factory will make a minor deduction to this height measurement to allow for easy installation of you new shutter.

Height and width adjustments needed

Our factory will make any necessary adjustments needed to enable easy self-fitting of your blind. Do not make any adjustments to your measurements. Just send us the precise dimensions you measured carefully.

Important note if the height of your shutter is over 1800mm

If your shutter height is greater than 1800mm it will automatically include a centred divider rail.

How to measure for Face Fit Shutters

Face fit with protruding sill

Face fit with non protruding sill

Important not about the importance of accurate measuring

Our Fit-Yourself Shutters are very easy to install but it's essential that the measurement of the window space into which they need to fit, to be very precise. You MUST use a steel measuring tape and measure each and every window, regardless of whether or not they appear identical. In most cases, they won't be.

Our Outside Mounted Fit-Yourself shutter will come to you without and deductions to the sizes you specified on your order to us. When ordering your Outside Mounted shutter, ensure that you specify the 'finished sizes', including the frame.


When determining the finished width of your Fit-Yourself Shutter, make sure you measure the OUTSIDE edge of the architrave ( as shown in the diagram above).


When measuring a window with no sill, please ensure that you measure the edge of the architrave using a steel measure. Measure from the top of the sill to the very top edge of the architrave ( as shown in the diagram above).

How to install


Do you do installation?

No, we are an online supplier only, all our customers do the installing themselves.

Can i order samples of fabrics?

Yes, on our website you can order free samples and we will ship it for free.

Do you supply extension bracket?

Yes we can supply those please make note of this in the comment section of your order.

What if my blinds don't fit?

You can organise to send your blinds back if they are too large. We can trim them down for a small fee.

If your blinds is too short you will need to purchase new ones. So check triple check your measurements.

What are your office hours?

Our customer services operates Monday to Friday 10:30am - 6:30pm AEST

Can you do a Cord Control Vertical Blinds

Yes we can.

What colour is Opal Anodised

Silver Brushed.

Product Review
Great guys to deal with
5 star
I've used Half Price Blinds for the past 2-3 years and they've always been top class. Great product, delivered efficiently and every blind always clearly labelled. Received a recent order with missing brackets and following a quick email, 2 days later I received the parts I needed postage free (WA).
Show more
Product Review
Excellent quality and fantastic service
5 star
We ordered the white nova blinds for 10 windows in our house. They were easy to install and the quality is excellent. We had to request a new pelmut and wand for one window and the customer service we received from Hayley was fantastic. She was very helpful and we are really happy with how the blinds look in our house. Finally the value of the blinds is very good for the quality. Highly recommended!
Sarah H
Show more