Description
Stylish Aluminium Venetian blinds
Add a splash of white in your home to invite more space and add a clean look. This Alabaster Venetian Blind has the cooling effect to an interior. Oh, so refreshing and calming! Isn't that is what a home is all about?
With Venetian Blinds, you can manage your room's natural lighting handily, allowing more light to brighten a space or blocking the light to darken it. It screens out unwanted attention from outsiders, too.
These simple, easy-to-use blinds include the following six, key features:
- Each of our two styles of aluminium blinds (Standard or Premium with 25mm slats) has a timeless appeal;
- Child-safe, loop-free cords for lifting and lowering the blinds more easily;
- Huge flexibility - go as wide as 3000mm and as deep (the full drop of the blind) as 3000mm;
- A sensationally colour-coordinated head, bottom-rail and cords;
- Each blind has a special wand to use to adjust the 25mm slats; and
- Great split-control to operate the wand and cords.
- 2 Year Warranty for your peace of mind.
| Minimum width: | 300mm |
| Maximum width: | 3000mm |
| Minimum drop: | 300mm |
| Maximum drop: | 3000mm |
| Blind colour: | Alabaster |
| Measurement type: | Recess or Face fit |
| Bracket type: | Metal |
| Bracket size: | 31.9mm x 28.8mm |
| Head rail size: | 24mm high x 25mm deep |
| Slat width | 25mm |
| Projection | 33mm from back of bracket to front of blind |
| Cord cleats | Clear PVC |
| Package contents: | Blind, fixing brackets, cord cleat, installation instructions, (hold down clips available upon request please add to comment section during checkout) |
How to measure
Measuring your window blinds
No matter what type of blind you require, measuring your windows is easy with our simple instructions.
What you will need
- Tape measure (metal ones are best)
- Pen and paper
Recess Fit (Inside window frame)
When the blinds are required to fit inside the window recess.
Select this option if you wish to supply the size of the recess into which the blinds will fit. To provide this measurement, select "inside recess" as the measurement option. This will require measurement of the window in 3 places, as shown to the right; please provide us with the smallest measurement.
On all blinds except Roller Blinds and Vision Blinds we will deduct a small amount to ensure the blinds clear the sides and bottom of the recess, allowing for correct operation. We will make a deduction of 10mm from the width, 5mm off each side and up to 10mm from the drop. On Roller Blinds and Vision Blinds we only allow approximately 2mm deduction on width measurement as this will lessen the fabric gap.
Roller Blinds Important Information
- The actual fabric width will be APPROXIMATELY 32mm LESS than the width you supplied..
- The GAP at each side is not the same. The gap at the control side is slightly wider than the other side.
- Do NOT order using fabric width.
Minimum Depth required for RECESS TO FIX BRACKET.
When the blinds are required to fit inside the window recess.
Select this option if you wish to supply the size of the recess into which the blinds will fit. To provide this measurement, select "inside recess" as the measurement option. This will require measurement of the window in 3 places, as shown to the right; please provide us with the smallest measurement.
On all blinds except Roller Blinds and Vision Blinds we will deduct a small amount to ensure the blinds clear the sides and bottom of the recess, allowing for correct operation. We will make a deduction of 10mm from the width, 5mm off each side and up to 10mm from the drop. On Roller Blinds and Vision Blinds we only allow approximately 2mm deduction on width measurement as this will lessen the fabric gap.
Roller Blinds Important Information
- The actual fabric width will be APPROXIMATELY 32mm LESS than the width you supplied..
- The GAP at each side is not the same. The gap at the control side is slightly wider than the other side.
- Do NOT order using fabric width.
This is a guide with an understanding that the minimum depth for the bracket may mean that the blinds and bracket will sit outside the window recess.
| Roller Blinds | 30mm - 70mm |
| Double Roller Blinds | 30mm - 100mm |
| Vertical Blinds 89mm | 30mm - 85mm |
| Vertical Blinds 127mm | 30mm - 90mm |
| Aluminium Venetian Blinds | 20mm - 35mm |
| Timber-look Nova Blinds | 30mm - 70mm |
| Cedar Venetian Blinds | 30mm - 70mm |
| Panel Glide Blinds | 30mm - 65mm |
| Vision Blinds | 55mm - 85mm |
| Sheer Curtains (Vertical Sheer Blinds) | 30mm - 90mm |
Face Fit (Outside window frame)
When the blinds are required to hang outside the window recess.
For all types of blinds follow these instructions if you want your blind to hang outside the window recess:
- Measure the exact width of where you'd like your blind to be. We recommend the blind overlaps the window by at least 50mm to a 100mm on each edge depending on the space you have. If you have an architrave we recommend measuring from outside of architrave to outside of architrave. Note the measurement.
- Measure the exact drop from the top of where you want your blind to be to the bottom. Please note we recommend 50mm to a 100mm above the window opening depending on the space you have. Note the measurement.
Roller Blinds Important Information
- The finish blind will be made EXACTLY to the width you supplied.
- The actual fabric width will be APPROXIMATELY 32mm LESS than the width you supplied..
- The GAP at each side is not the same. The gap at the control side is slightly wider than the other side.
- Do NOT order using fabric width.
Handy Hints
- All of our blinds are made to measure. Please follow the instructions carefully. Make sure you take your measurements using a STEEL rule or tape.
- Take all your measurements in millimetres (mm).
- When measuring, always look out for things like window handles or tiles and take their position into account if necessary, to ensure a perfect fit.
- When taking measurements please follow this helpful rule - "measure once, measure twice and measure again to be sure!".
- All of our blinds can be fitted into the face of the window frame or wall, or into the top of the lintel. This gives you complete control over the positioning of your blind.
How to install
Aluminium Venetian Blind Installation Instructions
Download Chain-drive Instructions
Download Chain Drive Operational Guide
Please Note: Screws are not supplied for bracket fixings and are dependent on the surface to which you are fixing please see chart below for recommended guide:
| Fixture Guide | Recommended Philips Head |
|---|---|
| Wood | ¾" 8 gauge for recess fit and ½" 8 gauge for face fit |
| Steel | ½" 6 gauge |
| Ceiling | Toggle Bolt |
| Plasterboard | Wall mates |
| Aluminium | ½ 8 gauge or tech screw |
| Brick | Green plug and 1 ½ 8 gauge self tapper |
Watch how to install a Aluminium Venetian Blind
1
Depending on if your blind is face fit or recess fit place the brackets in position and with a pencil mark the surface of the wall or window recess for drilling. Brackets should be positioned at each end of the head rail avoiding internal controls. On larger blinds one or more central support brackets are required.
2
When you are happy that you have correct positions for the brackets pre drill the screw holes and fix brackets securely.
3
To fix the blind in position, gently push the head rail onto the front hooks of the bracket (this is the plastic sprung insert) Push inwards and twist the back of the head rail upwards in one motion. The head rail will snap into position.
4
Secure the safety cleat supplied, firmly to the wall at least 1.6m up from the floor to avoid a choking hazard. It is important to keep chains and cords safely away from children your new blind will have a safety warning tag attached please read carefully and do not remove.
5
To operate your new blind use cord control to lift and lower, using a steady tension and movement and avoid jerking or tugging of the cords.
Faqs
Do you do installation?
No, we are an online supplier only, all our customers do the installing themselves.
Can i order samples of fabrics?
Yes, on our website you can order free samples and we will ship it for free.
Do you supply extension bracket?
Yes we can supply those please make note of this in the comment section of your order.
What if my blinds don't fit?
You can organise to send your blinds back if they are too large. We can trim them down for a small fee.
If your blinds is too short you will need to purchase new ones. So check triple check your measurements.
What are your office hours?
Our customer services operates Monday to Friday 10:30am - 6:30pm AEST
